PEAVEY GUITAR AMPS

Skip to Peavey.....

Vyper Series, TransTube Series,
Valve King Series, Classic Series


PEAVEY VYPYR SERIES AMPLIFIERS


Peavey proudly introduces its new VYPYR Series modelling guitar amplifiers, the most technologically advanced and affordable guitar modelling amplifiers available.

With double the processing power, models and effects of competitive modelling amplifiers, the VYPYR Series dramatically redefines the power and scope of modern guitar amplification. VYPYR amplifiers are based on a combination of powerful 32-bit, floating-point SHARC processors and patented TransTube analogue circuitry.

Featuring 24 amp channel models- both the clean and distorted channels of 12 popular amps for the first time anywhere- plus 11 editable preamp "stomp box" effects and 11 editable post-amp "rack" effects with dual-parameter control. Players can use up to five effects simultaneously. When used with the optional Peavey Sanpera II foot controller, the possibilities further expand from 12 in-amp presets to 400 programmable presets, with an on-board looper and more.

The VYPYR also acts as its own computer audio interface, with a built-in studio-quality USB 2.0 output on most models that is recognized by computers as an audio device. The entire six-model VYPYR Series features the easy-to-use Peavey WYSIWYG (What You See Is What You Get) interface.

Peavey Vyper 15 Peavey Vypyr 15 Guitar Amplifier
  • - 15 watts (rms)
  • - One 8 inch custom voiced modelling speaker
  • - Four channels
  • - True analogue distortion
  • - Tap tempo switch
  • - 11 editable Rack effects
  • - Dual parameter FX control
  • - 12 Onboard programmable presets
  • - Up to three FX simultaneously
  • - Studio quality headphone out
  • - MP3/CD/Aux input
Peavey Vyper 30 Peavey Vypyr 30 Guitar Amplifier
  • - 30 watts (rms)
  • - One 12 inch custom voiced modelling speaker
  • - Four channels
  • - True analogue distortion
  • - Tap tempo switch
  • - 11 editable pre-amplifier Stompbox effects
  • - 11 editable Rack effects
  • - 12 onboard programmable presets
  • - Studio quality headphone out
  • - Chromatic tuner
  • - Compatible with optional Sanpera footswitch
  • - MIDI In/Out
  • - MP3/CD/Aux input
Peavey Vyper 75 Peavey Vypyr 75 Guitar Amplifier
  • - 75 watts (rms)
  • - One 12 inch custom voiced modelling speaker
  • - Four channels
  • - True analogue distortion
  • - 11 editable pre-amplifier Stompbox effects
  • - 11 editable Rack effects
  • - 12 on-board programmable presets
  • - Dual parameter FX control
  • - Power Sponge output attenuator
  • - Chromatic tuner
  • - Compatible with optional Sanpera footswitch
  • - MIDI In/Out
  • - Studio Quality USB interface
  • - MP3/CD/Aux input

PEAVEY TRANSTUBE SERIES AMPLIFIERS


Peavey Audition Peavey Audition Guitar Amplifier
  • - 7 watts (rms) into 8 ohms
  • - 4 inch heavy-duty speaker
  • - TransTube tube emulation circuitry
  • - Master Volume control
  • - Clean and Lead channel switch
  • - 2-band passive EQ
  • - Headphone jack
Peavey Backstage Peavey Backstage Guitar Amplifier
  • - 10 watts (rms)
  • - 6 inch custom designed speaker
  • - TransTube preamp with 2 switchable channels
  • - Volume and Overdrive controls
  • - 2-band EQ
  • - Tape/CD input for practice
  • - Headphone jack
Peavey Solo Peavey Solo Guitar Amplifier
  • - 12 Watts (rms)
  • - 8 inch Blue Marvel speaker
  • - TransTube tube emulation circuitry
  • - Clean and Lead channels
  • - 3 band passive EQ
  • - 1/4 inch stereo CD Input/ Direct Out jack
  • - Low damping factor for lively tube power amp sound
  • - Headphone jack
Peavey Rage Peavey Rage Guitar Amplifier
  • - 25 watts (rms)
  • - 8 inch super-duty Blue Marvel speaker
  • - Two switchable channels: clean and lead
  • - 3-band EQ
  • - Tape/ CD input
  • - Modern/vintage voicing switch
  • - Headphone jack
Peavey Envoy Peavey Envoy Guitar Amplifier
  • - 40 Watts (rms)
  • - 10 inch Blue Marvel speaker
  • - High and Low Gain inputs
  • - TransTube tube emulation circuitry
  • - Footswichable Clean and Lead channels
  • - 3 band passive EQ on each channel
  • - 3 position EQ/Gain Voicing switch on each channel
  • - Reverb with level control
  • - Footswitchable Boost with level control
  • - 1/4 inch stereo Speaker Simulated Direct Out jack
  • - Headphone jack
Peavey Bandit Peavey Bandit Guitar Amplifier
  • - 80 Watts (rms) into 8 Ohms
  • - 100 Watts (rms) into 4 Ohms (w/external speaker)
  • - 12 inch Blue Marvel speaker, High and Low Gain inputs
  • - TransTube tube emulation circuitry
  • - Footswitchable Clean and Lead channels
  • - 3 band passive EQ on each channel
  • - 3 position EQ/Gain Voicing switch on each channel
  • - Reverb with level control
  • - Footswitchable Boost with level control
  • - 1/4 inch stereo Speaker Simulated Direct Out jack with level control

PEAVEY VALVE KING SERIES AMPLIFIERS


With boutique features like Peavey's patented Texture control, you can coax virtually any tone from the tweaked-out, 6L6GC- and 12AX7-equipped Peavey ValveKing tube amplifier. Texture allows sweepable selection between class-AB and simulated class-A power structures to take you from molten modern to vintage tones, with all the soulful swagger between.

Peavey Royal 8

Peavey Royal 8 Guitar Amplifier
This true Class A amp uses EL84/6BQ5 output tube and one 12AX7/ECCC83 preamp tube with no negative feedback in the power amp.

  • - 5 watts into 8 ohms
  • - 8 inch speaker
  • - Gain and master volume
  • - Tone control
  • - High and low gain inputs
Peavey ValveKing 112 Peavey ValveKing 112 Guitar Amplifier
  • - 50 watts (rms) into 16 ohms
  • - Two 6L6GC and three 12AX7 tubes
  • - 12 inch ValveKing speaker
  • - Two independent footswitchable channels
  • - Separate EQ for each channel
  • - Footswitchable gain/volume boost on lead channel
  • - External speaker capability
  • - Reverb with level control
  • - Buffered effects loop
  • - Resonance switch for "tight or loose" cabinet response
  • - Patented Texture variable Class A simulation control
Peavey ValveKing 212 Peavey ValveKing 212 Guitar Amplifier
  • - 100 watts (rms) into 16, 8, or 4 ohms (switchable)
  • - Four 6L6GC and three 12AX7 tubes
  • - Two 12 inch ValveKing speakers
  • - Two independent footswitchable channels
  • - Separate EQ for each channel
  • - Footswitchable gain/volume boost on lead channel
  • - Dual paralleled speaker jacks
  • - Reverb with level control
  • - Buffered effects loop
  • - Resonance and presence controls
  • - Patented Texture variable Class A simulation control

PEAVEY CLASSIC SERIES AMPLIFIERS

Born and built where it all began, the Peavey Classic Series has evolved in the Mississippi Delta since 1973. All vintage vibes, versatility and wailing gain possibilities, these amplifiers come alive with the magic combination of 12AX7 and EL84 tubes and a timeless design from one of music's enduring innovators.

Classic 30 Peavey Classic 30 Guitar Amplifier
  • - 30 watts (rms) into 16 or 8 ohms
  • - Four EL84s and three 12AX7s
  • - 12 inch Blue Marvel speaker
  • - 2-channel preamp
  • - Pre- and post-gain controls on lead channel
  • - Normal volume control on clean channel
  • - 3-band passive EQ (bass, middle, treble)
  • - Boost switch, Reverb level control
  • - Effects loop
  • - Footswitch selectable channel switching and reverb
  • - External speaker capability
  • - Chrome-plated chassis
  • - Classic tweed covering
Classic 50 Peavey Classic 50 Guitar Amplifier
  • - 50 watts (rms) into 16 or 8 ohms
  • - Four 10 inch Blue Marvel speakers
  • - Four EL84s and three 12AX7s
  • - Normal and bright inputs
  • - 3-band passive EQ
  • - Presence control
  • - Normal and lead volume
  • - Lead pre- and post-gain
  • - Master volume
  • - Reverb control
  • - Effects loop
  • - Fan cooled
  • - Chrome-plated chassis
  • - Tweed covering